Model #GEQ8858KQ0 WHIRLPOOL Residential Dryer

  • Top And Console/literature
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

i need a wiring diagram for a whirlpool dryer model GEQ8858KQ0- thanks in advance

A:

Dryer repair is becoming more of a home project. Having the right diagrams does help. I attached two links below that have diagrams and possible access to wiring schematics. I attached to the links below if you wish to check while waiting for the expert.

Read More
Barbara H. -
March 25, 2012
A:

You can view the wiring diagram for your dryer in the image below. Let me know if I can be of further assistance.

Read More
Fred M -
Sears Technician
March 26, 2012
See more answers
Q:

How do I test the heater element in my Whirlpool dryer?

A:

I can see how that can be an inconvenience, i did find a similar question like yours. While you wait for an expert, i would suggest to have a look at the link down bellow, good luck.

Read More
celene -
August 31, 2010
A:

Remember to disconnect power before attempting access. Mark locations & remove the 2 wires off the element, place your ohm meter leads across the 2 element terminals, your meter should read between 7.8-11.8 ohms.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
September 01, 2010
See more answers

Top Parts