Model #GD5YHAXNL03 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Water dispenser for Whirlpool model GD5YHAXNL03 GD5YHAXNL03

A:

Thank you for your inquiry on your Whirlpool Refrigerator, Model: 790.45489502. From reviewing the details on your model, a good check will be to check the pressure, first turn the shut off valve off. Now disconnect the water line, at the inlet valve, behind the refrigerator. Place the end of the water line in a bucket or pitcher and turn the water back on. If the water flow is weak the problem could be with the shut off valve or the water pressure will need to be checked, by the water company or a plumber.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the refrigerator to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
August 10, 2015
Q:

Whirlpool icemaker doesn't work GD5YHAXNL03 Whirlpool Side-by-side refrigerator

A:

The ice maker not making ice can be problematic. I did some research on your model number but was not able to find a solution. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that everything does work out with the ice maker.

Read More
Marc -
January 07, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your icemaker not working in the refrigerator. We are here to help. The image below shows the ice maker test. The test results you have is normal. I suspect the jumper wire on t&h was not removed. Therefore, the ice maker continued to cycle. If the jumper wire was removed, the thermastat is shorted out causing the ice maker to cycle. The ice maker thermostat needs to be replaced. I suspect the problem is no water to the ice maker. The water tube to the ice maker may be frozen. I recommend squeezing that tube to see if it is crunches. If it is, the line is frozen. Place a hot rag on the tube to thaw it out. Now, if the fill tube is not frozen, a voltage test at the valve needs to be performed with a multimeter. To perform that test, Jump the module at the t&h to cycle the ice maker. Next, when the ejector on the ice maker is at the 12 o'clock position, there should be 105-120 vac at the valve for 7 seconds. If the voltage is present, the valve is not opening for water. The water valve needs to be replaced. Zero voltage indicates a bad module or open wire to the valve. Check the wire with a multimeter. If the wire is good, replace the ice maker module or ice maker. I hope this helps.

To order parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
January 08, 2013
See more answers
Q:

Ice Maker not making ice GD5YHAXNL03 Whirlpool Side-by-side refrigerator

A:

The ice maker not making ice can be problematic. I did some research on your model number but was not able to find a solution. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that everything does work out with the ice maker.

Read More
Marc -
January 07, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your icemaker not working in the refrigerator. We are here to help. The image below shows the ice maker test. The test results you have is normal. I suspect the jumper wire on t&h was not removed. Therefore, the ice maker continued to cycle. If the jumper wire was removed, the thermastat is shorted out causing the ice maker to cycle. The ice maker thermostat needs to be replaced. I suspect the problem is no water to the ice maker. The water tube to the ice maker may be frozen. I recommend squeezing that tube to see if it is crunches. If it is, the line is frozen. Place a hot rag on the tube to thaw it out. Now, if the fill tube is not frozen, a voltage test at the valve needs to be performed with a multimeter. To perform that test, Jump the module at the t&h to cycle the ice maker. Next, when the ejector on the ice maker is at the 12 o'clock position, there should be 105-120 vac at the valve for 7 seconds. If the voltage is present, the valve is not opening for water. The water valve needs to be replaced. Zero voltage indicates a bad module or open wire to the valve. Check the wire with a multimeter. If the wire is good, replace the ice maker module or ice maker. I hope this helps.

To order parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
January 08, 2013
See more answers

Top Parts