Model #GD5RHAXTS01 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator side not cooling ? GD5RHAXTS01 Whirlpool Side-by-side refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

I have a Whirlpool SXS Refer M#GD5RHAXTS01, S#SU3533498 where I need to replace the I/M Dispensor Motor (Part #W10271507) thats located in the freezer door.

A:

Needing to find out where to locate dispenser so you can replace it can be a mystery without instructions. While you are waiting on an expert to answer your question, I was searching the Manage My Life website and found your owner's manual and found your diagram in the Sears Parts Direct website. I have attached the link below. Hope this helps!

Read More
Dezeray S -
April 19, 2011
A:

Replacing some parts can be a challenge. The motor is now located on the freezer door in a foamed-in-place enclosure under the �dispenser bubble� area of the inner door panel. The motor is mounted to a plastic mounting bracket, which, in turn, is mounted to the enclosure with four mounting screws. I'm attaching some pictures with instructions to access and replace the auger motor. I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
April 21, 2011
A:

This is great info, but if you look at the diagram #2c, it says to remove the two screws from the motor housing cover and remove the cover. Problem is, my refer does NOT have the two screws, it's like it's glued in. I have even tried to very carefully pry it up, but it is really stuck in there. Any suggestions. Please advise.

Read More
rhawkins58 -
April 22, 2011
A:

I'm sorry you are having this problem. There should be 2 screws holding the compartment door in place (see screws # 23 in picture). If these 2 screws are not there, it would lead me to believe the cover has been removed before and the screws were not put back in place. Now, if it's as tight as you say, about the only thing that would hold it so tight, would be some type of adhesive. I have never heard of this happening before. This door will have to be removed to access the motor. If you do not feel comfortable getting this door free, I recommend having a technician come out to check it. You can call 1-800-469-4663 to schedule a tech to come out. If you would like more assistance, any additional details will be helpful.

Read More
Scott D -
Sears Technician
April 22, 2011
See more answers

Top Parts