Model #GD22DFXFN00 WHIRLPOOL Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Air Flow
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Control
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Freezer Model 33207 Frostless - Occasional Whine from (Back?) of Freezer

A:

It is always a little frustrating when an appliance starts acting up on us. We need to know that a freezer will perform. There can be a lot of money in that food that you are putting in that unit. I'm sorry to hear that you are having some issues with your Kenmore Freezer. I did some research at Managemylife website and found an expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. If you do decide to schedule service and have a qualified technician assist you, I have attached a link to SearsHomeServices.com. I hope the links below will help you.

Read More
James -
March 07, 2012
A:

Thank you for your question. I can understand your concern about this sound. If this sound is coming from inside the freezer, it will probably be from the evaporator fan motor. If it seems to be coming from the back of the cabinet and if this unit has an icemaker, it would probably be from the water valve. In this case, turn the icemaker off and it will stop energizing the water valve. I hope this will help you. If you would like more assistance, please include the complete model and serial number and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 08, 2012
A:

I bought this freezer (Kenmore 33207) from a friend for cheap and have the same problem. It does not have an icemaker (at least not in my model). And I can't find the motor anywhere online. I have taken it apart and oiled everything several times (not sure if this was appropriate) but each time the noise only stopped for a few hours. Are the fan motors somewhat universal? If I bought a Kenmore motor for a newer model does it have a chance of working? Other than the squeak the freezer works like a dream.

Read More
Lon -
March 31, 2012
A:

I'm sorry you are having this problem. Unfortunately, the model number listed is not complete and I'm not able to access any information. However, if this is a frost free upright freezer, it should have a fan motor behind the back panel. There are various motors and I would not recommend purchasing one, without the correct part number. If you would like more assistance, please include the complete model and serial number and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
April 02, 2012
A:

Hi I have a Kenmora freezer model 33207 and The door gasket is loose. The freezer is very old but works well , and i love it. I need to buy a door gasket to replace the old one , original is probably impossible but is there a similar one ? Can you help me with this matter ? Thank you Maria

Read More
Maria a ferreira -
March 04, 2013
A:

Maria, replacing a door gasket on some older models can be difficult. Unfortunately, the model listed is not complete and I'm not able to access any information. If you would like to have a technician check this, you can call 1-800-469-4663 to schedule a tech to come out. If you would like more assistance, please recheck to verify the complete model number and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 05, 2013
A:

Hi Maria. It looks like you used the stock number for your refrigerator. I have that same refrigerator. It is Whirlpool GD22DFXFN00. I found parts for that model on the Sears Parts website (www.searspartsdirect.com). The gasket is listed but it is kind of expensive. You can order that part if you want to spend the money. You can soak the gasket in warm water or heat it with a hair dryer to soften it up and remove the creases. I believe the old gasket will pull out and you can push the new one into place. Scott can probably correct me if I am wrong about how to install the gasket.

Read More
Anonymous -
March 05, 2013
A:

Hi Thank you very much for your help . I am so glad that I will be able to fix my freezer , I live in Brasil and here we do not have large models like that one. I really appreciate it Thanks again Maria

Read More
Maria a ferreira -
March 05, 2013
A:

Thank you very much for the model number. This shows to be a side by side model. I suspect from the information listed, that this will be for the freezer door. I'm listing the beige gasket for both the freezer door and the fridge door: 1. Freezer door gasket ---- # 2159072 2. Fridge door gasket ------ # 2159073 These gaskets will be the pull/ push type. There is a lip on these gaskets that will fit into a channel in the door. Pull the original out toward the side to remove it. The new gasket will push back into the channel in the door. I hope this will help you. If you would like more assistance, I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 05, 2013
A:

Hi Thank you very much for your help.I 've alredy bougth the part. Maria

Read More
Maria a ferreira -
March 05, 2013
See more answers

Top Parts