Model #GCGQ2152ES0 FRIGIDAIRE Residential Dryer

  • Cabinet/drum
    3 Results
  • Front Panel/lint Filter
    3 Results
  • Controls/top Panel
    3 Results
  • Motor
    3 Results
  • Burner
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Frigidaire Gas Dryer (Cycles But No Heat)

A:

I understand how frustrating this can be. While you are waiting on an expert to answer your question, I found a great link in the Manage My Life website on your error code. I also suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
July 10, 2012
A:

I know that it can be very frustrating to have issues with your dryer. The safety thermostat, the thermistor control, the ignitor and the radiant sensor can all be tested to determine if they are working properly. The continuity test is the same as the one you preformed for the relay and the cord. You will be looking for the 120 volts for each of these. If you are getting this on all of the parts then you will need to replace the coils. If not, replace the part that is not getting this amount. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 13, 2012
A:

Thanks for the help. After reading and reading and reading and reading some more, I did the continuity test on all the items listed above. I found out that it was the ignitor. I then purchased the ignitor and all if fine now. THANK YOU!

Read More
Tawn -
July 14, 2012
See more answers

Top Parts