Model #GBS307PRQ00 WHIRLPOOL Built-In Oven, Electric

  • Oven Parts
    3 Results
  • Oven Door Parts
    3 Results
  • Internal Oven Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Top Venting Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whirlpool Built-In oven does not heat after running self-cleaning cycle

A:

I know that it is very important to have all of your appliances working properly, especially when you need to use them. While you are waiting for your expert answer, I have found a link that will provide some information and troubleshooting for the problem. These repairs are ususally easy so they are something that you can do yourself. I hope this helps.

Read More
aashe -
September 22, 2011
A:

That link for a previous answer that Aashe posted in the above response discusses a similar problem. You could have a blown thermal fuse on the back of the oven that is preventing those elements from heating. The wiring diagram in the first image below shows that thermal fuse on your model. The second image shows the location of that component. I recommend that you shut off the house circuit breaker for your oven and pull it out of the wall. Here is a link from the Whirlpool website for the installation instructions for your oven: Installation Guide . You can use that document to help you remove the oven from the cabinet. You will need to remove the screws that secure the oven to the cabinet.

Once you remove the oven, you can check that thermal fuse using the information shown in this brief video: Thermal Fuse Testing . If that thermal fuse is blown, it will need to be replaced. You can order that part from the Sears PartsDirect website. That part number for that safety thermostat is 9759243.

If that thermostat is okay, you could have a wiring failure or a bad electronic control board in the oven. Reply with additional details if you need more help with this failure.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 26, 2011
See more answers

Top Parts