Model #GBS307PDQ0 WHIRLPOOL Built-In Oven, Electric

  • Oven
    3 Results
  • Oven Door
    3 Results
  • Internal Oven
    3 Results
  • Control Panel
    3 Results
  • Top Venting
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whirlpool Oven (GBS307PDQ0) Fault Code E3 (amber) -F2- (blue). What does the code mean and can it be fixed? Part number would be appreciated.

A:

Having your oven begin to give you error codes can be very frustrating,. I did some research on the code and provided a link to a similar question and answer on our site. i hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
September 17, 2012
A:

That link for a previous answer provides some information about that E3 -F2- error code. It indicates that you have a stuck button on that control panel. Normally, that control panel would need to be replaced to fix that type of failure. I checked on the part (part number 4451347). That control panel is no longer available as a replacement part from the manufacturer. In this situation, it does not appear that you will be able to repair that problem since that replacement part is not available. You will probably need to replace the oven.

You can view current oven models on the Sears.com website.

Read More
Lyle W -
Sears Technician
September 19, 2012
A:

Lyle, are we talking about the touchpad (part number 4451348)? I can't find Part Number 4451347. If I can find the part is it something I can replace?

Read More
Anonymous -
September 19, 2012
A:

That part 4451348 is the same part as 4451347. Neither of those parts appear to be available. If you are able to find a used part or a part from a distributor that is still available, then you should be able to use the procedure shown in that previous answer that Julio posted to install that panel. Be sure that you shut off the house circuit breakers before accessing internal components. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 19, 2012
A:

I don't mean to question your recommendation, but I'm getting conflicting information and hoping that you can further clarify my issue. Another source says that my problem is the Control Board (#589288), not the Control Panel (#4451348). Since I'm not smart enough to know the difference or significance of either part, can you confirm that my problem could be corrected by changing out the Control Panel instead of the Control Board, or could the problem be in either of these parts?

Read More
Anonymous -
September 25, 2012
A:

Since the control panel is no longer available, replacing the control board (part 589288 on Repair Clinic or manufacturer part number 4448875) is your only chance for fixing that problem. The link for a previous answer that Julio posted in the first response on this thread indicates that Mrs. Lee fixed that problem by replacing the control panel. That is a known fix and the most common cause of the E3 F2 code in that type of Whirlpool oven. There is a chance that a bad control board could be causing the problem. The manufacturer (Whirlpool) does not provide a method for checking the control key panel buttons so it is a guessing game. As noted above, replacing the control board is your only chance for repairing this problem since the control panel is no longer available (unless you can find a used one).

Read More
Lyle W -
Sears Technician
September 26, 2012
See more answers

Top Parts