Model #GBD307PDS5 WHIRLPOOL Built-In Oven, Electric

  • Lower Oven
    3 Results
  • Upper Oven
    3 Results
  • Oven Door
    3 Results
  • Latch
    3 Results
  • Internal Oven
    3 Results
  • Control Panel
    3 Results
  • Top Venting
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Whirlpool double oven (convection) #GBD307PD55: The fan runs constantly and the broil element burnt out. Thank you for your guidance in


I can understand how important it is to have all your appliances working properly. While you are waiting for your expert answer, I have found a link that will provide some information and troubleshooting for the problem. I would sugges that you test the heating element to make sure they is no power coming from it. I hope this will help you.

Read More
aashe -
June 06, 2011

Since the broil element is not heating, I recommend that you shut off the house circuit breaker for the oven to disconnect electrical power and test that element for continuity. Here is a brief video that shows how to perform that test: Video: Bake Broil Heating Element Part Testing . Here is a video that shows how to replace a broil element in a similar type of oven: Video: Range Broil Element Replacement . If that element is bad, it will need to be replaced.

If the element is okay, you could have a blown fuse that is preventing it from heating. I provided a wiring diagram for that oven in the image below. There is a thermal fuse on that back of each oven. On a non-Self Clean oven, that fuse could prevent the broil element from heating. You can check the continuity through that fuse if necessary.

I assume that the fan that you are referring to is the cooling fan for the control. That fan is controlled by a relay on the control board. Since that fan is blowing constantly, you may need to replace the control board to fix that problem.

I hope that these tips help. If you need more assistance, reply with additional details.

You can order parts from the Sears PartsDirect website.

Be sure that you shut off the house circuit breaker or remove both house fuses for the oven before accessing internal components.

NOTE: This answer is based on model number GBD307PDS5 (not 55). I assume that the second to the last character was a "S" and not a "5".

If you need more help, reply with additional details and an updated model number.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 08, 2011
See more answers

Top Parts