Model #FZ-1 PANASONIC Compact Disc

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers


What can I do, to fix this fridge problem.


The baffle could be stuck or broke, the control board could have failed or the sensor may have failed. The most common problem is a broken damper. To verify if the damper door is broken, remove the light shield and rear light bulb from the top of the refrigerator. Enter the factory diagnostic mode by pushing all four temperature control buttons at the same time. Perform the damper motor test (FZ 1, FF 0). Press any other button i.e. Custom cool or filter reset to start the damper test cycle. Shine a flashlight through the right hand side opening of the light assembly to view movement of damper door. To exit test mode press (FZ 1, FF 6). If the damper door does not move replace the baffle assembly # WR49X10091. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
October 05, 2009