Model #FWX233RES0 FRIGIDAIRE Residential Washers

  • Cover
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Transmission
    3 Results
  • Control Panel
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

i have a frigidaire modle fwx233res0 i need to know how to intall the belt

A:

First disconnect power to the washer. The front panel will need to be removed now. Lift the top panel by inserting a small screwdriver under the front lip and pull it forward and pry upward at the same time. This will free the lock clips. Now remove the screws at the bottom and the panel can be removed. With the panel off, you will have access to the belt. Push in on the idler pulley and twist the belt off (see picture). The new belt will twist back on. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Safety Notice: Be sure to disconnect the appliance before performing any troubleshooting procedures. If you are not comfortable with doing any voltage checks or repairs that might be recommended, please contact a local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Scott D -
Sears Technician
June 11, 2010

Top Parts