Model #FTF530FS2 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a front load Model # FTF530FS2. It will not drain. I checked for clogs. Drain pump looks good. Is there a way to test? I have no schematics?

A:

I know how important it is to have a washer that is draining properly so that your clothes will not be sloppy wet at the end of the cycle. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
December 28, 2010
A:

The drain pump on this washer can be checked with an ohm/volt meter. It runs on 120 volts. Use extreme caution if you check voltage to the pump.

The image below will show how to change the pump as a do-it-yourself project. The image below will help you with this.

Remember to unplug the washer first.

Read More
Fred M -
Sears Technician
December 29, 2010
See more answers

Top Parts