Model #FRS26R2AW6 FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Install refrigerator thermostat

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days. I also included the link below to Sears Home Services, if you decide to schedule service. Thank you for using Manage My Life.

Read More
Yadira B -
March 21, 2013
A:

Thank you for your question. Replacing this thermostat can be a challenge. I'm attaching some pictures with instructions to replace this thermsotat. Be sure to disconnect the power first. I hope this will help you.

Read More
Scott D -
Sears Technician
March 22, 2013
See more answers
Q:

Mod #FRS26R2Aw6 Frigidaire side by side, frig side freezing.

A:

A refrigerator is definitely something that we rely on to keep our fruits and vegetables nice and fresh. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
July 05, 2012
A:

The meat keeper drawer has a colder warmer slide control. My first suspicion if the refrigerator section is to cold then the control is bad or the air damper is bad. The air damper is part key 115 in the image below. If the air damper is stuck in the open position then the refrigerator section will likely be to cold. One thing to try is to turn the freezer control to the maximum cold setting for a few hours. Then try turning the control slowly to a warmer setting. At some point before 0 the compressor should shut down. If not then the control is likely at fault. I hope this helps. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
July 09, 2012
See more answers

Top Parts