Model #FRS26LF8CSN FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I remove the face plate from the ice/water dispenser in my Frigidaire refrigerator model FRS26LF8C

A:


Remove the drip tray from the bottom of the dispenser. Look for a screw at the rear of the dispenser that would be covered by the drip tray. If it is there remove it. Some models have this screw and some don't, so if you don't find one it is OK.

Remove the three phillips screws along the bottom trim of the dispenser. Pull the bottom edge of the dispenser forward about 1 inch. Slide the trim down and it will come forward, be careful of the wires connected between the front trim and the board and solenoid inside the dispenser.

The dispenser will remain inside the door, removing the front trim will allow you access to whatever part you need.

Read More
expert -
Sears Technician
August 01, 2007

Top Parts