Model #FRS26KR4DB1 FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I just installed a new ice maker and it will not let the water flow into the mold. What could be wrong?

A:

The most likely problem is the fill tube for the icemaker is frozen shut. Look at the tube that carries the water to the icemaker and you should be able to see the ice. If it is frozen you can defrost it with a hair dryer.

If the fill tube has no ice in it, turn the icemaker off and let it set for 2-3 hours. Open the freezer door and turn the icemaker on. The ejector should go around 2 times and on the second turn just before it stops it should energize the fill solenoid. You should hear the solenoid hum, If you don't the fill valve might need to be replaced.

You can test the coils on the fill valve with an ohm meter.

Read More
Jimmy K -
Sears Technician
June 19, 2008

Top Parts