Model #FRS23KF6EM4 FRIGIDAIRE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No water come out and no water in the ice maker FRS23KF6EM4 Frigidaire Refrigerator

A:

I am sorry that you are having some difficulties with your ice maker and water dispenser and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
February 07, 2013
A:

I didn't get the link. Can you resend it please.

Read More
Richard -
February 07, 2013
A:

Thanks for the information about your ice maker not getting water; sorry you are having this problem, I will be glad to assist you.

Based on your description of no water to door or to ice maker I would suggest checking the inlet valve where the household water supply connects. First check water pressure coming to the refrigerator. You should have a minimum PSI of 20 and a maximum of 120 PSI.

Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product

If this pressure is okay, reconnect the water and check the first single solenoid, remove the out tube and call for water to the door(use a container to catch the water) if a good flow comes out we know that solenoid is okay. . If no water comes out the valve is bad and the entire valve will need replacing.
If the first valve works okay, we must check that the double solenoids are getting return water from the filter by doing the same test (water should be coming from the filter back to the valves.) If there is good water back to the double valves then the complete valve will need replacing. If there is no water returning and we know the first single valve is good the problem will be a frozen filter line.
If the filter line is frozen, use a hair dryer to apply warm air to the filter housing and as much tubing as possible for several minutes.(You may want to do this first before taking the line loose at back of unit) If this fixes the problem reset you temperature control to a warmer fresh food setting.

I hope these tip and test help, if you need additional assistance please reply with added details and I will be happy to respond.

Read More
Ron H -
Sears Technician
February 08, 2013
See more answers

Top Parts