Model #FMV156DCC FRIGIDAIRE Microwave/Hood Combo

  • Oven/cabinet
    3 Results
  • Control Panel/door/misc
    3 Results
  • Wiring Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

Installing handle FMV156DCC FRIGIDAIRE MICROWAVE/HOOD COMBO

A:

I understand you are experiencing difficulties with your Microwave. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. This repair should be done only by a qualified service technician. I have provided a link To Sears Home Services if you decide to schedule service. It may be cost effective to just replace the unit, I have also provided a link to the Microwave section of Sears.com to price out what a replacement would cost.

Read More
Anna T -
August 24, 2012
A:

Thank you for your question.

I am sorry someone said you could install the handle yourself. Replacing a door handle on most appliances is no big deal but a microwave is not the usual appliance. Replacing the door handle is a repair that should only be completed by a service technician. Disassembling the door would involve removing the microwave shielding components. A technician will need to remove these parts, replace the handle, and then reassemble the door. A microwave radiation leakage test must be performed on the door using proper testing equipment before the microwave can be safely returned to service. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .


Please reply below if you need further assistance on the microwave.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 26, 2012
See more answers
Q:

Frigidaire Microwave model FMV156DCC

A:

I have provided the link to Searspartsdirect and that specific part. Your expert will respond shortly. A Sears associate may have that information also. The phone number is at the bottom of the web page.

Read More
James -
September 14, 2011
A:

Thank you for your question on the specifications of the screw for the handle on the microwave.

I am sorry but this information is not in publication and will require you to order the replacement screw part number 5304441895.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
September 15, 2011
See more answers
Q:

How do I change the Waveguide Cover in my microwave?

A:

This is an interior component that should only be replaced by a service technician. Following any internal component repair or part replacement, a radiation shielding test must be performed on the microwave using proper testing equipment. This is why I recommend that you have a service technician replace the waveguide cover.

Here is a link for the Sears Service website: Sears Home Services .

Read More
Lyle W -
Sears Technician
April 26, 2010

Top Parts