Model #FLEB43RGS0 FRIGIDAIRE Laundry Centers/Combos

  • Upper Cabinet/drum/heater
    3 Results
  • Motor/blower/belt
    3 Results
  • Control Panel
    3 Results
  • Lower Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Transmission
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the dryere and washer capacity for model fleb43rgs0? FLEB43RGS0 Frigidaire Laundry center

Q:

sagging dryer drum FLEB43RGS0 Frigidaire Laundry center

A:

Thank you for contacting SearsPartsDirect.com with your question about your Frigidaire Laundry Center. I am so sorry to hear the dryer drum is sagging. I know how quickly laundry can pile up and know you want to get this fixed quickly. I will be happy to help you with this. 
 
The dryer drum is held in place by a ball and socket style support bearing assembly. It is possible one or more of the parts in that support assembly is damaged or failing. I will be happy to outline the parts you will need to check.

SAFETY WARNING: Start by disconnecting power to the laundry center to prevent possible injury from electrical shock. 
 
I have included the link for you to view the parts diagram for the dryer and will list the parts you need to check for damage. 
 
 
Check the belt to see if it is stretched or cracked. Replace if necessary.  
The ball and ball clip are keys 5 and 6 in the diagram. 
The Drum Support Bearing and bracket are keys 12 and 13. 
The Ballhitch Shaft Assembly is key 32. 

While you are working on the dryer, I recommend you also check the drum glide (key 20) and the Basket Lower Seal (key 23). These parts will wear over time and it is a good time to replace them while you have the dryer opened up.  
 
To access the support assembly - 
 
Remove the slanted panel above the washer.
 
Remove the screws on top of the dryer that secure the front panel to the frame.
 
Remove the two bottom screws at the bottom of the front panel and carefully remove the wires to the door and light connections and set to one side.
 
From the back of the dryer remove the louvered panel and release the belt and remove the drum from the front of the cabinet.
 
Remove the screws that secure the ball shaft from the back of the dryer drum. (The screws are on the inside of the back wall of the drum).
 
Remove the white plastic bearing from the back of the cabinet. This should give you enough access to check for worn or damaged parts. 
 
I hope this helps. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
April 11, 2014

Top Parts