Model #FH50230 HOOVER Carpet Cleaner

  • Carpet Cleaner
    3 Results
Find part by diagram >

Question and Answers

Q:

Is it possible for me to install a part #304335001 FH50230 Hoover Floor cleaner

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your vacuum and do understand your frustration. Glad to help out. Im looking at your model number FH50230  the hose has 3 screws that are attached to the vacuum. You will need to remove the 3 screws and lift the hose upward to locate the hose connection. Remove the hose clamp to remove the hose. I have included some images on the process. Hope this information helps with your repair. If you have further questions please resubmit your question for further information. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 

Read More
Sherman_G_Wallace -
Sears Technician
April 10, 2014
A:
Sherman_G_Wallace -
Sears Technician
April 10, 2014
A:

Hi! I would like to say a Big Thank You! This will help me out a lot. I have had this Hoover Deep Cleaning machine for about 3 /12 years now and this is the first time I had to do anything with it. I take very good care of my equipment, for my dad always said take good care of things and they will last for a long time and this pays off for me every time. I know that some parts are not available anymore and discontinued in which is a shame for this machine does go above and beyond the call of its duty. More people make the mistake of not cleaning the filter screens in the machine and think oh no it is not working. If I find a used one no one wants I will use that one for parts for mine. I only had problems with the hose end for connecting the extra cleaning parts to. The reason was a fault of my own, luckily I was able to get the part from Sears and I know it is on its way to me. I would like to thank Sears and there associates for making my life easier. Thank you again for all your help!

Read More
Kay -
April 11, 2014
A:

Thank you I appreciate that and I am glad the information was useful to you. If you have further questions please resubmit your question for further information.

 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
April 14, 2014
See more answers
Q:

Not Working

A:

The model number is FH50230 orFH50240

Read More
Tari -
September 09, 2013
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your carpet cleaner not working. We are here to help. Based on the symptom, I suspect a clogged manifold or the solenoids are not working. The images below shows how to troubleshoot and repair the problem. I hope this helps.
 
To order carpet cleaner parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.
 

Read More
John H -
Sears Technician
September 11, 2013
See more answers
Q:

What would cause the brushes from spinning on my Hoover Steam vacuum/shampooer?

A:

Without knowing the model number and additional details I will not be able to provide any model specific information or troubleshooting information. You did not indicate if you hear the drive motor operating that causes the bushes to rotate or not. If the motor is not running it could have a motor failure, switch failure, loose wire connection or a broke drive coupler.

Resubmit your question with the model number and additional details for model specific troubleshooting instructions.

Read More
Joey S -
Sears Technician
June 05, 2009
A:

I am having the same problem with my Hoover Steam Vac (Model F-7223-900); Maytag Legacy. The lint filter is clean; brushes are clean; do not hear drive motor operating. Other than brushes not rotating, steam vac works fine.

Read More
Janice -
March 10, 2012
A:

I am sorry that it has taken so long to respond to your thread. Thank you for your question on the steam vacuum brushes not turning. The usual reason for the air turbine not turning the brushes is that the air intake filter for the air turbine is plugged Turn the unit over and locate the filter which usually is a bright color different from the base. It pulls down will need to be cleaned. If the filter is not built up with carpet fuzz and dirt then you will need to remove the brush drive unit by locating the plastic retainer clips and releasing them to remove the brush block assembly. There is a drive shaft that slides into the air turbine motor that drives the brush block. Check to see if the drive shaft is broken. If it is then the brush block will have to be replaced. Please let me know what you find out. Sam A.

Read More
Sam A -
Sears Technician
April 19, 2012
A:

the model# is FH50230 or FH50240

Read More
Tari -
September 09, 2013
See more answers

Top Parts