Model #FGFLZ87GCC FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Oven not lighting FGFLZ87GCC Frigidaire Gas range

A:

Thank you for your inquiry on your Frigidaire Range, Model: FGFLZ87GCC. From reviewing the details on your model, I have provided a link to a couple of videos on similar models of ranges, which should be able to troubleshoot what could be causing the oven to keep from igniting. The link is found below.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 13, 2015
Q:

Removing and Installing new main top of gas range

A:

I can understand your need for some type of instructions on how to properly install the main top to your range. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
May 14, 2013
A:

 Thank you for your question and I understand your concern.

I added an image below with the instructions. The image does not show the model with the center burner but the procedure is the same. Remove the grates, burner caps and the screws securing each burner to the top. See image below. Use caution when removing the screws. If the screws do not come out easily run the screw back in and out a little each time until you can safely remove the screw without breaking/snapping it off.

Disconnect the power cord from the power source before servicing. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.


Read More
Joey S -
Sears Technician
May 16, 2013
A:

Thank you for your question and I understand your concern.
I added an image below with the instructions. The image does not show the model with the center burner but the procedure is the same. Remove the grates, burner caps and the screws securing each burner to the top. See image below. Use caution when removing the screws. If the screws do not come out easily run the screw back in and out a little each time until you can safely remove the screw without breaking/snapping it off.
Disconnect the power cord from the power source before servicing. 
 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
May 17, 2013
See more answers

Top Parts