Model #FGFL77AQE FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

How to troubleshoot oven igniter FGFL77AQE

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the bake not working. I know how frustrating that is.

The oven bake igniter should have a resistance reading of 3.2 to 3.6 ohms. The voltage would be the standard 120vac. If that resistance checks out, you may also want to test the resistance of the oven temperature sensor. It should have a resistance of 1092 ohms, +/- 5%. If both of those components check out, the electronic control will more than likely need replacement. However, with this type of issue where the igniter glows, but is slow to reach temp, a replacement igniter will usually solve the issue.

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
February 03, 2015
A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your range oven and I do understand your frustration. Glad to help out. I'm looking at your model number FGFL77AQE and if the BAKE igniter is glowing but the gas valve never opens in order to have burner ignition then the most likely failure is BAKE igniter. If the BAKE igniter does not pull enough current, the gas valve will not open. So, if the BAKE igniter is glowing but never get any burner ignition, replace the igniter. If the igniter is not glowing red, then the oven may have a faulty Electronic Oven Control, relay board or gas valve. If it's not glowing then voltage checks must be made and I do not recommend checking voltages unless you have experience and feel safe and confident in doing so. Here is link that will help with testing the igniter. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
February 03, 2015
See more answers

Top Parts