Model #FGFL77AQC FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Frigidaire gas oven only gets warm.

A:

I searched for a link that would be comparable to your model number and did not find one. I did find one that is similar in situation and mechanically. That link is below for you to review. For a model specific response, you should be hearing from our expert team within a day or two. The link below is detailed and I hope it provides you a path that helps you. Until you hear from our team, have a pleasant morning.

Read More
Henry -
September 21, 2012
A:

Thanks for the question about your gas range heating issues. I will be glad to assist with this.
Your oven has a sensor that controls heat. I suggest that you first try checking the sensor. I am attaching a link that will guide you in performing the testing of the sensor.

Thanks Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

How to test oven sensor.

Read More
Ron H -
Sears Technician
September 21, 2012
A:

Befor I got your reply the oven stopped lighting. I checked the oven sensor, it is1085 ohms. The pot burners and the broiler all work. The oven ignitor lights but no gas lights, although I do smell gas sometimes. the ignighter measures 140 ohms. Can the igniter still be bad? Could I roll the broiler and oven ignitors to test them? Thanks.

Read More
Abe Garber -
September 24, 2012
A:

Hi Abe, Yes you should be able to switch the ignitors for testing. Let me know the findings Ron.

Read More
Ron H -
Sears Technician
September 24, 2012
A:

Hi Ron, The two ignitors turned out to be physically different sizes, so I couldn't roll them. I ordered a new oven ignitor and that fixed the oven. Thanks for your help. Abe

Read More
Abe Garber -
October 02, 2012
A:

You are welcome! Ron H.

Read More
Ron H -
Sears Technician
October 02, 2012
See more answers

Top Parts