Model #FGF337BCG FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

how to install part on gas stove

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 02, 2012
A:

Thank you for your question and I understand your concern.

In order to access and replace the electronic oven control/clock assembly, disconnect the power cord from the power source. Pull the range away from the wall and remove the screws securing the panel behind the console assembly. The electronic oven control is secured to a mounting bracket with 4 screws, one in each corner of the control. Remove the 4 screws and the control can be removed. Disconnect one wire at a time and transfer it to the control. Note; there will be a self adhesive over lay covering the front of the old clock/oven control that should be replaced. The old overlay will not stick to the new clock once it is peeled off. You will need to order a new overlay if you didn't order one. The new overlay will stick over the front of the new control. Make sure you have it aligned before sticking it on.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
November 03, 2012
See more answers

Top Parts