Model #FGF337BCD FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Ignitor FGF337BCD


Thank you for the inquiry and for using I am sorry to hear about the oven cavity not igniting, I know how frustrating it is to not have an oven. 

The issue you are experiencing will be caused by a couple of different issues. The most likely in my opinion is a communication error between the control board and the oven cavity, which would call for a control board replacement. Have you had any recent power outages/surges at the home? The second would be a faulty ignitor not glowing at the proper ohm temperature to allow the safety valve to release gas. 

To properly diagnose the issue, you will have to have and be confident in using a multimeter to check for continuity and ohm ratings. I have attached a few electrical diagrams below to assist you in troubleshooting the issue. If you cannot see my attachments, click here to be directed to to view my response with attachments. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service. 

If you have any further questions, don't hesitate to ask. I wish you the best with the diagnostics and hope it all works out for you. Thanks for using 

Read More
Jeff Wallace Sr -
Sears Technician
September 05, 2013

Top Parts