Model #FGF337AWF FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

why won't my oven heat up FGF337AWF Frigidaire Gas range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the range.

Glad to help out.   Im  looking at your Frigidaire model number fgf337awf.

The first thing to look at is your ignitor.   Just because it lights doesn't mean it is good.  It may not be getting enough spark to heat it up proplerly.

 

How to test electric bake/broil elements

Before testing the elements, It is wise to unplug your range or shut off the power at the fuse/breaker box to avoid an electrical shock.

Open the oven door and remove the racks from inside.  Pull the heating element from the oven after you unscrew it.

Turn the range scale dial on a multimeter to Rx1k.  Place one lead from the multi meter against the terminal on end of the element.  Place the other lead on the other termial of the bake element or broil element.  The reading on your meter should register between 19 and 115 ohms.  If no readins on the meter then you know for sure to replace it.

Bake ignitor for model fgf337awf 

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

 

 

Read More
Larry L -
Sears Technician
November 11, 2013
Q:

Oven won't stay at any temp goes above and below the set temperature is this a thermostat issue?

A:

It has to be close to impossible to do any baking when the Frigidaire oven is not keeping correct temperatures. To get the best answer to your questions please provide the model number to the range. Below I provided similar links that may help while waiting for an expert answer.

Read More
Anna T -
March 26, 2012
A:

The oven will normally cycle up to 20 or 30 degrees above and below the set temperature. To accurately check the oven temperature verses the set temperature, allow the oven to preheat and then cycle on and off at least 5 times. Measure the average oven temperature over a 10 minute period using an accurate thermometer. Compare that reading to the set temperature. If that average temperature matches the set temperature then the oven is probably working normally.

If the oven temperature cycles above and below the set amount by 100 degrees or more, then you could have a problem with the thermostat or the control.

Reply with additional details and the full model number of your Frigidaire range if you need more help with this problem.

If you get to the point where you need to have a service technician examine and test the oven, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 27, 2012
A:

fgf337awf is the model number and it ran for 2 hours put on 450 never change the setting and it rose to 400 then dropped to 175

Read More
Brandon -
March 27, 2012
A:

And yes impossible to bake anything using neighbors until problem is fixed lol

Read More
Brandon -
March 27, 2012
A:

Hello Brandon. Thanks for adding that model number. This type of problem is often caused by a weak glow bar ignitor (part 5303935066). I provided the theory of operation for that ignition system in the image below. I also provided a video that illustrates that ignition operation. If that igniter is glowing constantly even though the oven will not heat properly, then I recommend that you replace that ignitor. Here is a direct link for that part: Oven Ignitor for Frigidaire Gas Range Model FGF337AWF . Be sure that you UNPLUG the range and shut off the gas supply before accessing and replacing that ignitor. If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
March 28, 2012
See more answers

Top Parts