Model #FGF337ASJ FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

My Oven will not light. The igniter glows but the gas does not come on. I tried lighting by hand, but still will not light.

A:

A oven is a important appliance in a household so I can understand your concern. I have provided you below a link to Manage my life where a expert answered a similar question that can be very helpful to you. Hope it helps!

Read More
Maira E -
October 06, 2010
A:

maybe your gas line to the oven is either broken .or Clogged up not letting the gas to go though have to check that gas line make sure your gettinf gas flow ,

Read More
ggorgio -
October 06, 2010
A:

The answers from Maira B and ggorgio have good information. I am sending you some information also.

Since the ignitor is glowing you know the control is good and the wires to the ignitor and gas valve are ok.

The problem can be caused by the oven safety valve or the ignitor. The ignitor has to draw 3.6 amps for the gas valve to open.

To test the ignitor you have to read the amp draw of the ignitor.

Connect an amp meter to the ignitor and turn the oven on. Leave the ignitor on for 1 minute and read the amp draw. If the amp draw doesn't reach 3.6, the ignitor is bad. If the amp draw reads 3.6 or higher, the oven safety valve is bad.

Ignitors fail much more often than gas valves do. If you want to take a chance and replace a part without testing, replace the ignitor.

The part numbers for the oven safety valve and the ignitor are:

22 628 3203459 $116.19 Valve,safety, 22 628 5303935066 $63.79 Ignitor,oven kit ,w/nut & instr

Read More
Jimmy K -
Sears Technician
October 07, 2010
See more answers

Top Parts