Model #FGF316WGSH FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

change to accept propane FGF316WGSH Frigidaire Gas range

A:

Having interchangeable parts would be great. I did some research on your model number but was not able to find a conversion kit for it. Your expert will be able to help answer your question. It may take two business days. I do hope that everything works out on the range.

Read More
Marc -
January 13, 2013
A:

Thank you for your question and I understand your concern.

I added a link to Installation Instructions that will cover how to convert the range to LP gas. No additional parts are needed to convert this model to LP.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 15, 2013
See more answers
Q:

Do you have any idea why my I can't turn my oven thermostat?

A:

Are you pushing the knob in before turning it? Normally, you should have to push in and then turn the oven thermostat knob. If it will not push in, the knob is not going to turn the stem of the thermostat. Pull the knob off and push inwards on the stem of the thermostat. If it will not push in, replace the thermostat.

The part number of the thermostat is 316032411.

Read More
Joey S -
Sears Technician
August 07, 2009
Q:

Why is the oven not working on my Frigidaire range?

A:

On something like this I suspect a weak igniter. Even though the igniter #19 is glowing hot it is the current draw that triggers the gas valve #7 to open. You will need to check the igniter current draw with an amp meter or replace it to know if it is defective or not. The igniter should draw between 3.2-3.7 amps.

The other possibility is the gas valve or a wiring problem.

Read More
biker dave -
Sears Technician
August 04, 2009

Top Parts