Model #FFGF3013LWA FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Frigidaire stove ffgf3013lwa

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your oven displays an error code. I did look into the model number you have provided and I have found information to assist you. 

The F10 indicates that the control detects a runaway temperature in the oven. If the oven is overheating, this can be caused by a stuck relay or contact on the oven electronic control board. If this fault code appears when the oven is at room temperature, then the failure points to a failed oven temperature sensor probe circuit or a bad electronic oven control board. If you are able to unplug the range and access the oven temperature sensor, you can check the resistance of this component with a volt/ohm meter. At room temperature, most Frigidaire oven temperature sensor probes will measure about 1100 ohms at room temperature. If your probe measures 2500 ohms or higher, then a defective temperature sensor is causing this problem. If the sensor is okay, then I recommend reconnecting the sensor and checking the resistance through the wiring harness connection directly at the electronic oven control board (with the range still unplugged). The sensor is oven connected through violet wires on Frigidaire ranges. If the resistance is normal through the wires that plug into the control board, then it is likely that you will need to replace the control board.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 08, 2014

Top Parts