Model #FEFL79DBK FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

Burner stays on high FEFL79DBK Frigidaire Electric range

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your range and do understand your frustration. Glad to help out. Im looking at your model number FEFL79DBK and from your description I suspect that the switch has failed. Left front switch PN 3160215101 and right front switch PN 316238200 and here is a video that will show you how to test the switches. I hope this information helps with your troubleshooting. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 
 

Read More
Sherman_G_Wallace -
Sears Technician
June 25, 2014
Q:

Fidgidare Stove model fefl79dbk seemingly has no power to it until a knob is turned. When the knob is turned a beep and time turns on. No heat on element.

A:

It's always frustrating when an appliance you depend on goes out on you. I did some research at managemylife.com and found a similar question that may shed some light on the issue. If you decide to schedule service I have provided a link to searshomeservices.com. I hope the two links, one an expert answer are helpful until your expert can respond.

Read More
James -
December 04, 2010
A:

Thank you for your question and I understand your concern. Based on your symptom and details you have a voltage supply issue. It sounds like you may have a floating neutral supply. The clock must have L1, L2 and a neutral supply constantly in order for the clock to power up and the oven and surface elements to work. This type of electrical problem can be very difficult to pin point even for an electrician.

To diagnose the failure will require a service technician to diagnose and confirm and then you will likely have to have an electrician come out and resolve the problem. It's not likely a problem with the range.

I highly recommend calling a Sears technician at 1-800-4MY-HOME or 1-800-469-4663 to diagnose this type of failure.

Read More
Joey S -
Sears Technician
December 06, 2010
See more answers

Top Parts