Model #FEFL64DSC FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

error code FEFL64DSC Frigidaire Electric range

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is problems with the range.

Glad to help out.   Im  looking at your Frigidaire model number fefl64dsc.

F10 error code:

The EOC (AKA the oven control) detects a ruanaway heat condition.   Check RTD sensor probe and replace if necessary.  If oven is overheating, disconnect power.  If oven continues to overheat when the power is reapplied, replace the EOC.  Severe overheating may require the entire oven to be replaced should damage be extensive.  If you find you have to replace the control board then you will also need to replace the overlay that goes in front of the board.   

 I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.

Sensor probe  for model fefl64dsc

 
 
 
 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
November 20, 2013
Q:

Electric range FEFL64DSC made an exlposive sound while warming up. Circuit breaker blew. When reset the oven would not heat up. All other functions seemed OK.

A:

A range is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
February 11, 2013
A:

Thank you for your question and I understand your concern.

If the surface elements will continue to work, this would verify the range is getting the proper voltage supply. Based on your symptom and details, if the bake and broil elements are Okay, I suspect the electronic oven control/clock assembly will need to be replaced.  Disconnect the power cord from the power source and then remove the panel from behind the console and inspect the wiring and the components on the electronic oven control board. Based on the "explosive sound while warming up" it should be easy to find the burnt component or wiring connection on the electronic oven control/clock assembly.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 11, 2013
See more answers

Top Parts