Model #FEF455WFBC FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers


Frigidaire Model FEF455WFA freestanding electric range


A Range is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
October 26, 2011

I did not find information on that exact Frigidaire model FEF455WFA. I see models FEF455WFBC and FEF455WFBE. Based on the model FEF455WFBC, you should have replacement control board part 318185845 installed in that range. I recommend that you check the model number and the part number of that control board first. The original part number of the control board was 318013006 in the model FEF455WFBC. If you have the wrong control board installed, this could be causing your problem. You could also have a bad replacement control board.

If you have the correct control board installed, then your dr code likely refers to a problem with the door switch or door lock assembly switches. If you have a volt/ohm meter, you can check the continuity through the circuits traced in red and green on the wiring diagram shown below. Be sure that you unplug the range before accessing internal components. You should measure around zero ohms of resistance through those circuits with the oven door closed. If the circuit traced in red is "open" (measures infinite resistance instead of around zero ohms) then you probably need to replace that door lock motor assembly.

This information may help you with this failure. If you need more assistance, reply with additional details and an updated model number.

Read More
Lyle W -
Sears Technician
October 27, 2011
See more answers

Top Parts