Model #FEF336ECH FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers




Once you start to replace parts on teh Frigidaire range and it still does not work, then it's time to get some advise from the experts. Others have asked this question on other ranges and the information in the link may be helpful. Expert response on your specific model is within 24-48 hours.

Read More
Anna T -
October 19, 2012

I know that it can be very frustrating to have issues with your oven not heating. This could be caused by a faulty oven temperature sensor probe or a faulty electronic oven control. The oven temperature sensor should be removed, disconnected and tested for proper resistance using an Ohm meter. The oven sensor is located inside the oven cavity in the rear upper rear left or right hand corner. If the screws are visible from inside the oven cavity, it can be removed from inside the cavity. If you do not see screws, the wall oven will have to be removed and the rear panel in order to access and remove the oven temperature sensor.

Use the RTD scale I added in the image below for the resistance scale. If the probe is testing fine, then you will need to replace the control board. If you do not feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 21, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show