Model #FEF336ECG FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

oven will not heat up

A:

Managemylife.com has answers to problems with the Frigidaire oven, just let us know what model you have by clicking on reply to continue the thread. Response time is two business days, usually sooner. If you decide on service, that link is provided below. Thanks for your patience.

Read More
Anna T -
January 23, 2013
A:

The model number is FEF336ECG.

Read More
Carrie -
January 23, 2013
A:

Thank you for your question. I know it's frustrating when the oven stops working. The most likely problem will be with the control. Try resetting the control by disconnecting the power for 30 seconds and then reconnect it. If the oven still won't heat, a check can be made, to determine if the control has failed. Disconnect the power again and now remove the back panel cover, to access the control. When you can see the control, remove the wires on the bk terminal and L1 terminal and connect these wires together. Make sure they do not touch anything. Now reconnect the power and if the element heats, it indicates the control # 316455400 has failed and will need to be replaced. If it still won't heat, disconnect the power again and now remove the wires from the L2 in and out terminals and connect them together. Again do not let any of these wires touch anything and reconnect the power. If the element works now, it will still lead back to the control and it will need to be replaced. Do not leave these wires connected together. If the element still won't heat, a technician will be needed, to check the wiring in the range. I hope this will help you.

Read More
Scott D -
Sears Technician
January 24, 2013
A:

I have a Frigidare FEF379ACH - there was a flash of light and crack sound and then my oven stopped heating. I replaced the bake element and it appears that was not the problem, the oven is still not heating. Can anyone offer assistance as to what I should check next? What other parts could have failed that may require replacing?

Read More
Deborah -
January 24, 2013
A:

I just checked and the broiler is also not working but all the burners are operational. Please advise.

Read More
Deborah -
January 24, 2013
A:

Deborah, the most likely problem will be with the control. The information listed above will also pertain to your range but the control for this range is # 316207529. I hope this will help you. If you would like to have a tech make these checks you can call 1-800-469-4663 to schedule a tech to come out. If you would like more assistance, I will be glad to assist you further.

Read More
Scott D -
Sears Technician
January 25, 2013
A:

Thank you for responding and your expertise. I will relace the control.

Read More
Deborah -
January 25, 2013
A:

Deborah, thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
January 28, 2013
See more answers
Q:

frigidaire range oven not heating

A:

Troubleshooting range oven heating issues can be difficult without technical information and a little help. I checked previous posts for advice using the model above but nothing appears. It may help the expert if you can double check the model number and add if it is different. If you would like to schedule a technician visit to your home for diagnosis and repair, you can use the Sears Home Services scheduler below.

Read More
Barbara H. -
August 26, 2011
A:

you are right...the first letter is an F fef336ecg. The wiring is in perfect condition everywhere. It is strange that both the oven elements went at the same time while everything else works perfectly. I can only think that the temp sensor is not working, but does that make the two elements not work at all? It is not an expensive stove. I would not have a service call then any parts on top of that if I can get a used stove for less...Just the wiring package for this is over 100 dollars...then a service call on top...Silly! The thing is, they make it so hard to do troubleshooting that you can only do a service call. I would think it would be better for Sears to just put all the info needed on line and perhaps get the sale of parts rather than have me go get a different stove and leave them with nothing and bad feelings to boot.

Read More
william -
August 26, 2011
A:

Thank you for your question and I understand your concern.

The most likely failure preventing the bake and broil elements from heating are a faulty electronic oven control. If the double line break (DBL) relay fails to close the contacts and complete the path of L2 (line two) to the bake and broil elements; the oven is not going to heat. I added an image of the wiring diagram below. I traced the L2 circuit in red. If both oven elements have failed to heat at the same time then you can pretty much diagnose a faulty electronic oven control (EOC). The oven control can be accessed and replaced from the rear of the control panel. NOTE: Disconnect the power cord from the power source before removing the back panel.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 29, 2011
A:

Thank you so much for your answer. I don't even care if it is right. It gives me hope that I can work on it and I feel much better that someone is willing to help out. Very refreshing. It does sound quite logical. I will take a close look ASAP and see what I can do with it. Thanks again.

Read More
william -
August 29, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories