Model #FEF336BCA FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

How can I get testing and replacing instructions for a lens, indicator lamp and possible white wire replacement for a Electric Frigidaire Range.

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your range electrical. We are here to help. The burned part of the wire needs to be cut off and restriped on the end. If there was a terminal on the wire, a new terminal would need to be installed. Now, if the wire is still long enough to be hooked up without stretching it, the harness will be good. However, if the wire is not long enough after the burnt part is cut off, the harness needs to be replaced. Also, if the old harness is being used, ohm out the wire with a multimeter. That would confirm if there is any other bad spots in that wire. If the wire tests open with the multimeter, replace it. I also provided a schematic on the image below. The lamp and lens needs to be replaced. I hope this helps.
 
To order range parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.
 
Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
August 17, 2013
A:

Hi I have replaced the lens and lens indicator not realizing that my fuse had tripped in the garage. So my old lens indicator may actually still work. Anyhow the stove now works although the light showing that the elements are hot won't go off now? What can I do to fix that?

Read More
Marisel -
August 27, 2013
A:

Marisel, The hot surface light not turning off indicates, the hot surface sensor switch is shorted out. That switch is not sold by itself. It is part of the surface wire harness. Therefore the surface wire harness needs to be replaced or the light disconnected.

Read More
John H -
Sears Technician
August 28, 2013
See more answers

Top Parts