Model #FED300ASD FRIGIDAIRE Drop-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Maintop
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

replacement switch for frigidaire drop in stove front large burner fed300asd

A:

Substitution parts can sometimes look different from the original part. You can visit the PartsDirect website to chat or speak with an associate so they can explain the difference in parts. I have provided the link below. I hope this helps!

Read More
Jacqueline S -
August 27, 2010
A:

From what you're describing it sounds like you have L2 going to P (pilot). If the other surface unit switches have L1 going to pilot the new switch has to be wired the same way. I am providing you with the wiring diagram outlining voltage to the surface unit switch & information on using an ohmmeter to check the switch contacts. Remember to disconnect power to the range before attempting access or service. Also use extreme caution when working with voltage.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
August 28, 2010
See more answers

Top Parts