Model #FDBB4365FS3 FRIGIDAIRE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

Installing spray arm

A:

I understand how important it is for you to have proper instructions about installing a new part so that it fits just right. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
December 27, 2010
A:

The parts list diagram for the upper spray arm is shown in the image below. That arm (Key 24B) screws into the delivery tube (Key 32). You may need to shut off the house circuit breaker and water supply then pull the dishwasher out from under the counter. You will normally need to remove some screws from the mounting brackets that secure the front of the dishwasher under the counter. Carefully pull the dishwasher out from under the counter until you encounter the top of the delivery tube on the roof of the tub. This will enable you to put some downward pressure on the top of the delivery tube so that you can screw the upper spray arm into place from inside the tub.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 29, 2010
A:

So you have to pull the diswasher out? I was thinking you could unscrew from inside the tub. The air has broken off and I would like to replace it as simply as possible.

Read More
Daddy Boy -
December 29, 2010
A:

That very top spray arm can be removed by unscrewing it from the inside of the dishwasher. When you install the new one, you may be able to catch the threads on that delivery tube that is above the tub without pulling out the dishwasher. It will have upward play. If you are not able to thread the new spray arm into that feed tube because of the upward play, then you will need to put some downward pressure on the top of that delivery tube. You may be able to insert a yard stick to similar slim item in between the top of the dishwasher and the front of the counter to exert that downward pressure while you screw the new spray arm in. If not, then you will need to pull the dishwasher at least partially out.

Read More
Lyle W -
Sears Technician
December 30, 2010
A:

I provided an image below that shows that delivery tube on the top of the dishwasher.

Read More
Lyle W -
Sears Technician
December 30, 2010
See more answers

Top Parts