Model #FDB750RCS0 FRIGIDAIRE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

How to take 2 "base" parts apart? FDB750RCS0 Frigidaire Dishwasher

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

frigidaire dishwasher temperature sensor ( thermostat) replacement

A:

Dishwashers are an awesome appliance to have it helps washing all the dishes but when a part goes bad it can ruin are day. While you are waiting on an expert to answer your question, a suggestion I have is to set service with a Sears technician so they can fix your appliance. I have attached the link below. Have a great day!

Read More
Dezeray S -
March 03, 2012
A:

Thank you for your question and I understand your concern.

The thermostats are easily replaced but they are secured up under the bottom of the tub. The thermostats are located in a clip that pushes them up against the bottom of the tub. There are 3 thermostats on your model. It has a Hi-Limit safety thermostat, a temperature boost thermostat for wash and a temperature boost thermostat for rinse.

Disconnect the power supply from the dishwasher before removing the lower access panel. I added an image below with the basic instructions.

THERMOSTATS (ON SUMP)

  • Disconnect the dishwasher from electrical supply.
  • To remove either thermostat, remove the outer door panel and kick plate.
  • Disconnect the wires from the thermostat and remove the single 1/4" hex screw.

HIGH LIMIT THERMOSTAT (ON TUB BOTTOM)

  • Disconnect the dishwasher from electrical supply.
  • Disconnect the wires from the thermostat and remove the single 1/4" hex screw.
  • Determine failure causing high limit thermostat to open before replacing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
March 05, 2012
See more answers

Top Parts