Model #FDB750RCC1 FRIGIDAIRE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Question and Answers

Q:

I have a frigidaire front load washer. Model FDB750RCC1. I have a funny clicking noise when it starts up. Would this be the water inlet valve or the pump?

A:

I clicking noise coming from the washer can really cause some concern and I am sorry for the inconvenience. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with the washer troubles, while you wait for your expert response.

Read More
Joseph P. -
July 17, 2012
A:

Hi Cort,

Thank you for submitting a question to Manage My Life.

The model number you gave me is for a Frigidaire dishwasher but you mention a front load washer in your description. I am going to assume you need help with a dishwasher. In order to help you determine which component is making the noise you are hearing, I am including the timer chart for the dishwasher model you have. Refer to this chart and see what is running when you hear this noise.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
July 19, 2012
See more answers
Q:

What part do I need when my lower spray arm on my Frigidaire model FDB750RCC1 keeps coming off?

A:

From your description the most likely cause of this problem is one or both of the clips on the spray arm have broken.

The spray arm has two clips that should snap over a ridge on the spray arm support and snap into place. See the image below for a picture of this.

The spray arm support is round at the top and has a ridge on it. The two clips on the spray arm should lock into place and hold the spray arm.

The spray arm is part number 154568001 and the spray arm support is part number 154294101 and both are available from the following link: Sears PartsDirect .

I hope this information helps to resolve this problem for you. If you have any other questions then submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
June 12, 2009

Top Parts