Model #FDB1051RES2 FRIGIDAIRE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >


Question and Answers


My dishwasher only works if I unplug it from under the sink and replug it in. It is a Frigedarire model #FDB1051RES2. Is there a reset button somewhere on it?


On something like this I suspect the control board, wiring harness or door switch. This model does not have a reset. I recommend removing the lower inspection panel & the junction box cover to inspect the power supply connections. If the door switch, power supply & connection are good I recommend checking the harness connectors at the control board next. If everything looks good then you will need to replace the main control board part number 154712101

Please see the images provided below for access instructions.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
April 28, 2010

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show