Model #FAFS4473LW0 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Error 00 (empty) FAFS4473LW0 Frigidaire Washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

E00 means no failure code experienced.

The E00 code likely indicates that there are no saved error codes. 

If you see it in the diagnostic test mode then you may not have given the washer time enough detect a problem.

To Clear Latest Stored Error Code
• Press the CANCEL button to enter standby mode and 
enable diagnostic entry.
• Within 10 seconds after pressing CANCEL, press any 
button (except the cancel button) to wake up the 
control.
• Within 5 seconds of wake up, turn the selector knob 
to the far left cycle and press and hold the CANCEL 
and center button under the display simultaneously 
for 3 seconds to enter the Diagnostic Mode.

Diagnostic Test
The diagnostic test is used to check individual washer 
component function only.
To Start The Test:
• Press the CANCEL button to enter standby mode and 
enable diagnostic entry.
• Within 10 seconds after pressing CANCEL, press any 
button (except the cancel button) to wake up the 
control.
• Within 5 seconds of wake up, turn the selector 
knob to the far left cycle and press and hold the 
CANCEL and the center button under the display 
simultaneously for 3 seconds to enter the Diagnostic 
Mode.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 22, 2015
A:

I could not get the diagnostic test to work following the steps provided. Maybe further details about my situation will help. The washer originally paused with about 15 minutes left on a normal wash cycle. After holding the start and cancel button together I got the error code E32. After replacing the parts the tech data sheet indicated I can't get any cycle to start. The washer indicates it is sensing for about 2 seconds and then goes to paused. I then have to hold the start and cancel buttons together to get the error code E00 (empty). It doesn't make sense that the old error seems to be corrected but now the new error isn't even identified on the tech data sheet.

Read More
JOEL -
July 22, 2015
A:

I had a Sears technician come look at my washer. Seeing that the pressure sensor and main control board had be replaced he diagnosed the wiring harness as the issue. Now that the wiring harness is replaced I continue to have the same problem. Upon hitting start it indicates it is sensing for about 2 seconds and then goes to paused.

Read More
JOEL -
August 02, 2015
See more answers

Top Parts