Model #F-70 MURATA Fax Machines

  • Unit
    3 Results
  • Unit Assembly
    3 Results
  • Control Panel Pcb
    3 Results
  • Front And Rear Frames
    3 Results
  • Document Guide A
    3 Results
  • Document Guide B
    3 Results
  • Scanner Frame Assembly
    3 Results
  • Feed Roller Assembly
    3 Results
  • Platen Mechanism
    3 Results
  • Clutch Assembly
    3 Results
  • Donor Support Assembly
    3 Results
  • Donor Housing
    3 Results
  • Solenoid Assembly
    3 Results
  • Cassette Assembly
    3 Results
  • Power Supply Cable And Ink Ribbon
    3 Results
  • Telephone Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Error Codes WED9500TW2 Whirlpool Residential dryer

Q:

F 70 code and no lid lock 110.27082604

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore washer.

I can understand the frustration of your washer not functioning properly, after researching model number 110.27082604. The error code F70 indicates an overload. The size of the load exceeds the washers capacity. Open the lid and remove some garments. Restart the cycle.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
August 17, 2015
A:

I have unplugged and emptied the washer and still have an f70 code. How do I clear the code

Read More
PT -
August 17, 2015
See more answers
Q:

F70 code MEDE500VW1

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching modelMEDE500VW1; the "F70" fault code indicates a loss of communication between the console panel and machine control board. Disconnect the dryer cord from the power supply

and remove the top panel and check for loose connections on each control board. Make sure that the connections are not disconnected or damaged.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
August 03, 2015