Model #F17WCE WC WOOD Upright Freezer

  • Cabinet Parts
    3 Results
  • Door Assy
    3 Results
  • Compressor Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I remove the door handle from a woods model f17wce upright freezer.

A:

When it comes to removing parts or needing instructions Manage My Life is the place to visit. I took some time to search in the Manage My Life website and found your owner's manual. I have attached the link below. Hope this helps!

Read More
Dezeray S -
June 18, 2011
A:

Thank you for your question. Some parts can be a challenge to remove and replace. To remove the handle on this freezer will require removing the inner door panel (# 4 in picture). The door will need to be taken off of the freezer to get the panel off. Under the gasket will be some screws or clips that will fit all the way around the door and have to be removed. Both the gasket and panel can now be removed, to access the screws, holding the handle in place. I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 20, 2011
See more answers
Q:

Can I get the correct door gasket for my freezer?

A:

Unfortunately, WC Woods has gone out of business and after talking with the remaining contact for the manufacturer, we found that parts are no longer available. I'm listing a number you can try, (905-513-7131 ext.222). I hope this helps you.

Read More
Scott D -
Sears Technician
January 29, 2010
Q:

What can I do, to get the correct door gasket?

A:

This does show to be the correct door gasket and there are no problems shown regarding this gasket. You can reorder the gasket, it may have gotten packaged wrong but I suspect this will be the correct part. Gaskets will be bigger then the door and look like they won't fit but will shrink down when installed. If you need more assistance, please resubmit your question, with additional details.

Read More
Scott D -
Sears Technician
January 27, 2010