Model #F140 BIONAIRE Air Cleaner

  • Air Cleaner
    3 Results
Find part by diagram >

Question and Answers

Q:

Dryer is slow to dry heating element cycles 200 plus F to 140f 110 64832400

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.

Based on the information you have provided this definitely sounds like an air flow problem. I know you stated the vent appears to be clear. The best test for this is to remove the vent for one cycle and run the dryer. See if the drying time improves. If it does then you know the issue is inside of the vent hose. If it doesn't you may have a lint built up in the cavity of the dryer or on the fan. 

Please let me know what you find out.

I look forward to working with you.
Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
April 01, 2014
Q:

How do I stop my Kenmore elite 630.1630* from etching my glasses?

A:

I understand needing to have further information for your dishwasher. I know how convenient these units are so I am happy to help. With the model number you have provided I was able to view the manual as well. I show it is recommended to use powered detergent versus the liquid.  Unfortunately, I do not see an energy saver setting for your model. You will always want to use the information within the manual because that comes directly from the manufacturer.

 I did some further research and located some information regarding the causes of etching on glass. The causes include:

1. Manually pre-rinsing dishes before loading. Removing all food soils prior to loading increases the alkaline concentration of the dishwasher detergent and increases the possibility of etching.

2. Not adjusting the amount of detergent according to the level of water hardness. Refer to the chart below. If the water is mechanically softened, the hardness level should be set at 3-4 grains per gallon rather than totally softened at 0-1 grains per gallon.

3. Water temperature is too high. Water entering the dishwasher should be between 120° F - 140° F. Do not use the water heating options. Do not use the heated dry option.

4. Using the Pots & Pans or Normal cycles when only the Light/China cycle is needed. Exposing the dishes to longer cycles or more detergent than necessary increases the possibility of etching.

Inappropriate amount of dishwasher detergent for the degree of water hardness or the amount of food soil. The general recommendation is one teaspoon of detergent for each grain of water hardness (gpg), with a minimum of three teaspoons when water is soft.

Refer to the following chart: Water Hardness Detergent Use;

  • Soft (0-3 grains) 3 tsp.
  • Medium (4-9 grains) 4-9 tsp.
  • Hard (10-13 grains) 10-12 tsp.
  • Very Hard (14G grains)

To determine water hardness:

a. Use a Water Hardness Test Kit

b. Contact the local water utility or state university extension service.

I hope this will be helpful but if you need further assistance please feel free to reply back.

 Thank you for using Manage My Life.

Read More
Desiree -
Sears Technician
November 12, 2013
Q:

My dryer is not heating. What part can I replace? DLG5966W Lg Residential dryer

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss this situation in greater detail and suggest parts you might need to consider. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your dryer and have a nice day.

Read More
Henry -
January 24, 2013
A:

What is the link?

Read More
Bernie -
January 24, 2013
A:

Thanks for the inquiry about the dryer not heating, sorry you are experiencing this issue.
Your dryer electrical system is very complex and in order to determine the cause for no heat, testing of components will be required. I have added two images of the most common reasons for the problem. If you have the required testing equipment and tools to access components the images will help.
Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product

If you do not feel confident about testing I recommend calling for service, and allowing a trained technician diagnose the dryer problem. (Parts are expensive and if you order yourself they are not returnable.)

I hope this helps, if you need additional assistance please reply with details and I will be happy to respond.

Ron H.

Read More
Ron H -
Sears Technician
January 25, 2013
A:

Here are the images again.
Ron H.

Read More
Ron H -
Sears Technician
January 25, 2013
A:

Hi, no heat at all, suspect high temp safety switch, do not know if this dryer has automatic reset or manual reset. If this dryer has manual reset is it possible to reset without disassembling the dryer? this dryer is LG model DLG5966W serial number 75136706002637051313 thanks you

Read More
jere -
June 21, 2013
A:

unable to find a wiring schematic or diagram, is there one inside the cabinet?

Read More
jere -
June 21, 2013
A:

Hi Jere , a diagram is normally placed inside the control console. Ron H.

Read More
Ron H -
Sears Technician
June 21, 2013
A:

ere about 4 hours ago Hi, no heat at all, suspect high temp safety switch, do not know if this dryer has automatic reset or manual reset. If this dryer has manual reset is it possible to reset without disassembling the dryer? this dryer is LG model DLG5966W serial number 75136706002637051313 thanks you

Read More
jere -
June 21, 2013
A:

Hi Jere, there are no resets on the dryer.Did you find the diagram in the console.? Ron H.

Read More
Ron H -
Sears Technician
June 24, 2013
A:

Ron, this dryer has a manual reset safety thermostat on the gas funnel according to one of your associates, believed to be F-140 parts list, the part is # N-100. The dryer has to be dissembled in order to reset. Is there a Automatic reset safety switch available to replace this part? I would prefer to replace once and not have to disassemble the dryer in the future. The parts list in the service manual is incomprehensible to me, there are two different part numbers for the switch's The model P/N at the top page of the parts list does not correlate with any model or serial number on the unit. Perhaps the serial number listed above might be of some help for proper switch.

Read More
jere -
June 24, 2013
See more answers