Model #F-100 BIONAIRE Air Cleaner

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

dryer not drying completely 11072062102 Kenmore Gas dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer is not working properly. 


Gas Valve:

Measure resistance of thefollowing terminal
Valve 1 terminal
Valve 2 terminal

Resistance value : > 1.5kg ~
Resistance value : > 1.5~2.5kg

Igniter: Measure resistance of terminal to terminal:
Resistance value : 100~800Ω


Outlet Thermostat (Auto reset) • Check Top Marking :N95
Measure resistance of terminal to terminal
Open at 203 ± 7°F (95 ± 5°C)
Close at 158 ± 9°F (70 ± 5°C)

Resistance value ∞
Continuity < 1Ω

Outlet Thermostat (Manual reset) • Check Top Marking :N100
Measure resistance of terminal to terminal
Open at 212 ± 12°F
(100 ± 7°C)
Manual reset

If thermal fuse is open must be replaced
Resistance value ∞
Continuity < 1Ω

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 14, 2015
Q:

Need complete steering wheel for Ford pickup? 1968 F-100 Ford pickup

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 24, 2012
A:

The problem your going to have is trying to locate one already built and assembled. Most refabricators do that work themselves assembling the columns wiring and parts together since the demand for your application isn't that great there for not economically feasible. Sorry

Read More
MikeLangton -
Sears Technician
November 26, 2012
See more answers
Q:

Where can I find a complete steering wheel equipped with a column and all the trimmings?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 24, 2012
A:

The problem your going to have is trying to locate one already built and assembled. Most refabricators do that work themselves assembling the columns wiring and parts together since the demand for your application isn't that great there for not economically feasible. Sorry

Read More
MikeLangton -
Sears Technician
November 26, 2012
See more answers