Model #EWFLW65HTS0 ELECTROLUX Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Detergent Dispenser drawer won't stay closed EWFLW65HTS0 Electrolux Washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Electrolux washer.  

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number EWFLW65HTS0. The reason why the dispenser drawer will not stay latched is because of insufficient clearance between dispenser drawer fascia and top panel. The top panel pushes against the dispenser drawer fascia causing the dispenser drawer latch hook to crack. This reduces the latch hook's ability to keep the drawer in the closed position. The solution is to Place (2) spacers "bumpers" on the rear bracket to increase the clearance between drawer dispenser and top panel, and replace the drawer latch. Order the service kit 137146000, which provides instructions on where to place the spacers and how to replace the drawer latch. The kit can be ordered from

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 12, 2015
A:

This is good advice and solved the same problem for me. Rather than replacing the whole drawer assembly, the $12 latch easily went into place following the excellent instructions provided in the kit 137146000. Also the replacement latch is much sturdier than the original and won't be as likely to break. I didn't even have to use the spacers.

Read More
Warren -
October 31, 2015
See more answers
Q:

What does code E42 mean? EWFLW65HTS0 Electrolux Washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model EWFLW65HTS0; the “E42” error code indicates a door lock device failure.  It sounds like the door lock switch may need to be replaced, I have posted a link of the door lock to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 05, 2015
A:

Hey Hope it's not too late to weigh in on this Error code 42 issue ... it has happen twice to me over the past three years the latest was 9/8/2015. before you go ordering the door lock device mentioned above take a look at the silver push button Two screws remove the assembly... take notice to the plastic tab that pushes against the metal plunger. If this is bent, broken or caved in the plunger will not go far enough into the electrical part of the switch. Three years ago I had to purchase a replacement button yesterday I was ...so far able to straighten the bent / concave plastic Hope this helps Carlos and anyone else that maybe looking.

Read More
Bob -
September 08, 2015
See more answers