Model #EW30GS65GW1 ELECTROLUX Slide-In Range, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Electrolux gas range: model EW30GS65GW 1. filler kit #903113901s ( stainless) - confirm use this instead of permanent counter behind. correct?

A:

Manage my life.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Maira -
February 27, 2012
A:

That filler kit 903113-901S is used instead of the permanent counter behind the range. That 30" height to the bottom of the cupboard above the range is correct. The installation instructions and contractor specifications indicate that your adjacent cupboard height (16") and depth (14.5") are not compliant with the recommendations. It is not recommended to install the range outside of those installation guidelines. I recommend that you check with a local building contractor or home inspector to see if those counters are in compliance with your local building codes. The 5" clearance from the nearest combustible wall pertains to walls that are beside the range. That should not be an issue according to your description. I provided a contractor spec sheet for that range in the image below. It sounds like you may already have that document. If not, you can use the information in that image if necessary. Also, here is a link for the installation guide in case you need it: Installation Instructions . If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
February 28, 2012
See more answers