Model #ET25DKXDN01 WHIRLPOOL Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Compartment Separator
    3 Results
  • Shelf
    3 Results
  • Unit
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a Whirlpool fridge et25dkxdn01, where can i find instructions to replace the thermostat?

A:

Instructions are the most important things to have in hand. While you are waiting on an expert to answer your question, a suggestion I have is to look over model number and add it to this thread so you can get a better answer from the experts! Hope this helps!

Read More
Dezeray S -
March 24, 2012
A:

Thank you for your question. Unfortunately, there are no instructions to replace this thermostat. The thermostat (# 10 in picture) mounts inside the control housing (# 2). First, disconnect the power and then remove the screws holding the housing and lower the control housing. With the housing down, you will see the thermostat and will be able to remove it. Pay attention to how the sensor is routed and the position of the barrier covering the sensor. I hope this will help you. If you would like more assistance, reply to this thread and any pictures would be very helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
March 26, 2012
See more answers

Top Parts