Model #ET18NKXXN00 WHIRLPOOL Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Compartment Separator
    3 Results
  • Shelf
    3 Results
  • Freezer Door
    3 Results
  • Unit
    3 Results
  • Refrigerator Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My evaporator fan doesn't run when cooling ET18NKXXN00 Whirlpool Refrigerator

A:

Seems to be a simple question.....is it supposed to be running(FAN) during the cooling or only during defrost?

Read More
Albert -
June 10, 2014
A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. The evaporator fan motor should start running after the compressor has been running for around 40 seconds. If the fan motor is not running it can cause the symptoms you described. If this is the case, you should replace the fan motor. That shows to be part number 482731, Click here for ordering information. Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
June 11, 2014
See more answers

Top Parts