Model #EL-1 REMINGTON Chainsaw, Electric

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I access the two outer screws (3438) of the front panel back housing. The power switch broke and I need access to assess. GFDS350EL1WW Ge Electric dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to remove the front panel on your washer. I did look into the model number you have provided, and I have found information to assist you. 

I have attached the image for the removal. 

Replace Bellow[1]


 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 



Read More
Natasha12 -
Sears Technician
July 17, 2014
A:

Hi, I'm having the same issue. Do you mind re posting the link to the "image for the removal"? The previous post seems to have a broken link. Sorry for the inconvenience.

Read More
Howard -
May 26, 2015
See more answers
Q:

control panel does not light up i have 240 @ outlet and 32 volts on the pig tail when i discontect from control board GFDS350EL1WW Ge Electric dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model GFDS350EL1WW: it sounds like the electronic control board may need to be replaced. The electronic control board governs the functions of the dryer including when it powers on and off, so when the control board fails it can cause the dryer to become unresponsive and not power on. I have posted a link of the dryer to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
April 28, 2015
Q:

blue light messages "tank low" and "enhanced dry" GFDN240EL1WW Ge Electric dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your dryer displays error codes. I did look into the model number you have provided and I have found information to assist you. I have found information to put your dryer into service mode.

How to enter service mode:
From idle state, press and alternate between the "my cycle" and "delay start" buttons to enter service mode. Upon entering service mode, the control shall be in test selection mode and display the first test number T01. Rotating the knob counter clockwise shall decrement the test number in the display. Rotating the knob clockwise shall increment the test numbers in the display.
Once the test number is selected, pressing start/pause shall begin the selected test. During a test, press power button shall terminate that test and bring the control to the test selection mode. Pressing power key during the test selection mode shall exit the service mode. 

Let me know what error code pops up.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 01, 2014