Model #EIDW6305GB0 ELECTROLUX Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Upper Frame/tub
    3 Results
  • Motor & Pump
    3 Results
  • Lower Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


My Electrolux Dishwasher will not turn on.


I know how important it is to have a good working dishwasher in your home so that you can keep your dishes nice and clean. While you are waiting for an expert answer, I did manage to find a link that will provide you with some tips about what may be causing your problem. I hope my link is useful.

Read More
Joseph P. -
August 10, 2011

Thank you for your question and I understand your concern.

I don't show model number EIDW6503 as being a complete or valid model number. I do show model number EIDW6305GB0 with several other modes ending with GB1, GB1A, GS0, GS1, GS1A, GW0, GW1 and GW1A.

You said you checked the power supply but you did not say where you checked it or what the voltage was. If the dishwasher is totally dead (no lights, no nothing) then the voltage supply should be checked where it enters the control board. I added an image below of the wiring diagram and some troubleshooting steps. I high lighted the incoming voltage supply in Green (neutral) and Black (L1). This voltage supply circuit will need to be checked and confirmed at the control board across the black and white wires. If voltage is not present at the control recheck the voltage supply where it connects to the dishwasher inside the electrical junction box. I highly suggest calling a service technician to diagnose and repair your dishwasher.

NOTE:I do not recommend checking voltages unless you have experience and you feel safe and confident in doing so; otherwise I recommend calling for service.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 12, 2011
See more answers