Model #EI30EF55GWA ELECTROLUX Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers


stove EI30EF55GWA


There are no instructions available. The side panels are usually fastened to the chassis with sheet metal screws. The screws are usually located under the top lip, front lip, bottom lip and rear lip of the side panel. The main top will have to be hinged open to access the top mounting screws. Disconnect the power cord from the power source before servicing.

The front of the cooktop can be lifted by removing the 6 screws that secure it to the range chassis. Open the oven door and look under the front of the main top. Note: The exact quantity and position of the screws can vary between models.
Once these screws have been removed slide the entire cooktop assembly forward approximately three inches to disengage the hinge tabs found on each side of the cooktop from the slot in the backguard assembly. Raise the front of the top up and use a wooden or plastic dowel to support the top while service is performed.

Read More
Joey S -
Sears Technician
December 18, 2014